Tools

Cleans bicycle chain quickly, easily, and effectively — without the hassle and mess of removing the chain from the bike. The Cyclone uses a large solvent reservoir, hundreds of rotating bristles, and a two-step cleaning process to get chains really clean, improve shifting performance, and extend the life of the chain and other expensive drivetrain parts. - Works with all multi-speed bikes (5, 6, 7, 8, 9, 10, 11, and 12-speed) as well as some single-speed models and e-bikes - Strong magnet at the bottom of the fluid reservoir holds metallic particles scrubbed from the chain - Special wicking sponge draws solvent from the chain as it exits, minimizing drips and mess - Sturdy handle makes the Cyclone easy to use and control - Holds 2 fluid ounces (59ml) of solvent

To prevent poor shifting and uneven drivetrain wear, most manufacturers recommend chain replacement at or before 1% stretch. Now you can quickly and accurately determine the wear and stretch of any chain with Park's Chain Checker. Simply insert the Chain Checker’s pins into 2 links, press the swingarm gauge tight, and then check the gauge window for an accurate reading!

The Masterlink Pliers is a multi-tool developed to provide functions that are not on a typical multi-tool. It is designed to be light and compact so you can carry it with you. This tool serves as a tire lever, valve core remover, valve stem lock nut wrench, and master link pliers. It also provides storage for two master links so you will always be prepared on the trail. Magnets hold the master links securely in place and self close the tool. - Weight: 38.5g - Size: 116 mm x 20 mm x 9 mm - Material: 7075-T6 aluminum - 9, 10, 11, and 12-speed master links and chains - Compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links

Zipp Speed Weaponry Valve Extender Wrench Set - Two 4 mm and 5 mm combination wrenches - Replacement wrenches required to properly install Zipp integrated valve extenders - Use with Zipp Tangente tubes with aluminum Presta valve and aluminum valve extender

- Includes everything for a quick fix while on or off-road - Giant seat bag - 12 glueless patches - 2 tire levers - Mini pump - 9 function multi-tool

Removes Presta and Schrader valve cores. CNC machined, anodized finish with laser-etched logo. Fits between spokes for quick and easy core removal. Features knurled end for a no-slip grip.

Park’s Professional Cable And Housing Cutter is specifically for use on derailleur and brake cables and housing. It even makes quick work of hard-to-cut shift-cable housing. Its cold-forged, heat-treated-steel handles won't bend and its precision-ground jaws cut perfectly every time. Its dual-density molded grips are specially contoured for superior comfort and control. Plus, there’s a built-in cable-end crimper and a forming hole for reforming housing ends.

• Updated to be stronger, smoother, and more versatile • Features a new material and redesigned tip for easier entry into just about any tire, including tubeless • The unique design lifts the tire away from the rim and features a spoke hook to use when multiple levers are needed • This set includes 3 tire levers

The new 8-Bit System is a group of multi-tools designed to work together to solve most trailside fixes. They are lightweight, strong, versatile, and small enough to fit in a jersey pocket or riding tool wrap. Three multi-tools begin the 8-Bit System: 8-Bit Chainbreaker + Utility Knife Multi-Tool, 8-Bit Tire Lever + Rim Dent Remover Multi-Tool, and 8-Bit Pack Pliers. A total of 22 functions between the three tools will keep you rolling to the next town or trailhead. - 17 functions: spoke wrench; valve core wrench; flat head #3.5 and Phillips #2 screwdriver bits; 2, 2.5, 3, 4, 5, 6, and 8mm hex; and T10, T25 Torx-compatible bits; install and remove master links; clear tire sealant clogs from valve stem; tighten valve stem lock nut - Magnets keep all bits in place - Ball detent swivel head helps access hard-to-reach places - Handle doubles as breaker bar for extra torque when head is bent - 8mm hex bit tested to over 40 Nm torque - Pliers works with 9-, 10-, 11- and 12-speed master links and chains (not compatible with Campagnolo 12-speed chains) - Master Link storage is compatible with SRAM PowerLock Link, Shimano Quick-Link, KMC Missing Link and other similar master links (not compatible with Connex Links by Wipperman)

Park's Gear Clean Brush has a handle on one end with a curved, serrated edge perfect for cleaning between cassette cogs. The other end's tough nylon bristles are ideal for cleaning the derailleurs, chain and other drivetrain parts to keep them clean and prevent premature wear. It also works great on brakes and other components that collect dirt and grime. The GearClean easily fits in a toolbox or pack.

An economical option for safely and accurately tightening fasteners to proper torque specifications. With a simple gauge readout, the TW-1.2 is intuitive and easy to use, and applies up to 14 Nm of torque to any fastener or component with left or right-handed threads. Perfect for low-torque applications such as stem bolts, levers, and carbon fiber components. 3/8" drive for compatibility with all Park Tool sockets, bits, and crow feet. - 0 to 14 Newton meter (0 to 140 inch-pound) range - 3/8" drive - Reads and registers torque values for both left hand and right hand threading - Length: 11.5" (292 mm)

Many chains use a master link that allows the chain to be installed and removed by hand. While master links don't require traditional chain tools, over time, dirt and corrosion can make it difficult to separate them by hand. Park's Master Link Pliers make removing and installing these master links quick and easy. Simply insert the specially sized jaws into the link and squeeze the vinyl-coated handles!

Park's Heavy-Duty Tire Levers handle the toughest tire-and-rim combinations including difficult downhill and freestyle tires. Their specially designed tips engage the tire bead so it can be removed with just two levers. Plus, these beefy, forged-steel levers are a full 8-inches long for superior leverage.

Park's Valve Core Tool is great for tightening, removing and installing Schrader and Presta valve cores (the cores are inside the valve), and also Presta valve extenders that have 5mm wrench flats. It's a handy tool to save a tube when all that's wrong is a broken valve, and it also lets you remove valves to easily insert sealant.

- CNC side panels with a lightweight, easy to carry, ultra-compact design - 8mm hex bit combines easily with 5mm allen wrench - Three integrated spoke wrenches - Full complement of bike-specific bits - MTB tire plugs included - Tools: 2, 2.5, 3, 4, 5, 6, 8mm Hex, PH2, T25, SL5, Valve Core Tool, MTB Tire Plug, Chain Breaker - Sizes: 78 x 48 x 8mm - Weight: 118g

Park's I-Beam Mini Fold-Up Hex Wrench/Screwdriver/Torx Set with Chain Tool includes 1.5, 2, 2.5, 3, 4, 5, and 6mm Allen wrenches, a socket 8mm Allen, a regular screwdriver, a T25 Torx tool (for disc-rotor bolts), a tire lever, spoke wrenches and a chain tool. The I-Beam conveniently fits in pockets and packs, too.

Stan's 2oz Tire Sealant Injector measures the desired amount of sealant then attaches to your valve stem for easy, no-mess application. And, it works on Presta and Schrader valves!

For use in conjunction with our reaming pedal taps, this thread insert is held in place with a strong thread locker and allows you to install any standard pedal. - Pack of 10, fits 9/16" pedals.

- Pre-calibrated torsion ratchet tool - Constructed with machined aluminum - Removable handle for easy storage in molded EVA case - Includes: 2.5, 3, 4, 5mm hex bits and T20, T25 Torx bits

- Ergonomic forged aluminum side plates. - Black forged Center-Pivot CrV bits wrapped. - Chrome Vanadium steel fastening hardware. - RAP 18/24/25: Cast stainless steel chain breaker with integrated spoke wrenches (HEX 8/10mm wrench, 4 spoke wrenches) - RAP 25: Lightweight aluminum Presta CO2 inflator. - RAP 24/25: Multi-function flat tool (bottle opener, DISC brake wedge, rotor trimming tool) - RAP 6: Hex: 3, 4, 5, 6mm; T25; Phillips - RAP 12: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25, T30; Flat; Phillips - RAP 18: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25; Phillips; quick link; steel chain breaker - RAP 24: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25, T30; Flat; Phillips; quick link; steel chain breaker; bottle opener - RAP 25: Hex: 2, 2.5, 3, 4, 5, 6, 8mm; T10, T25, T30; Flat; Phillips; quick link; steel chain breaker; CO2 inflator; bottle opener

Use on 8, 9, 10 speed and BMX/Fixie chains (3/32" and 3/16").

Choose the perfect tool for the job with Park's P-Handled Hex Wrenches. These top-shelf Allen wrenches come with offset handles made from durable nylon in a comfortable, ergonomic design. They are made of chrome vanadium for exceptional durability. The long shafts feature Bondhus heads for accessing hard-to-reach bolts and the short ends are chamfered for extra grip and high-torque applications.

Many bicycles will not shift or track properly because the front and rear wheels are not in line with the frame. If these conditions still exist after wheel and derailleur adjustments, the seat stays, chain stays, and rear drop outs of the frame may be misaligned. For years the accepted method to check the alignment of the rear drop-out was to run a string on either side. This method does work to some extent. However, it is not accurate because the measurement is not taken at the drop-out. With the Park Tool Frame Alignment Gauge, the alignment can be checked quickly and accurately at the drop-out. It includes a retractable pointer to fit all sizes and types of bicycles.

Simple and economical, Park's Home Mechanic Bearing Cup Press is the perfect addition to your toolbox. With a few quick twists it easily installs all sizes of headset cups and one-piece bottom bracket cups.

Securely holds the TS-4 Professional Wheel Truing Stand and tilts 20 degrees from front to back for comfortable wheel work and sight lines at any bench height. Features a wide, sturdy base, small parts compartments, spoke wrench holders, and is constructed of a durable composite material.

The BK-UK includes six new and revised parts for the Park Tool BKD-1 and BKM-1 Hydraulic Brake Bleed Kits, allowing for compatibility with the latest brake models from popular manufacturers. Includes: - Part #2600A (x2) — M4 x 0.8 adaptor for use with SRAM DB8, Trick Stuff, and Campagnolo mineral oil brake systems - Part #2588.2 — Thin-walled hose compression sleeve for internal bleed nipples, such as those found on Shimano mineral oil brake systems - Part #2574A — Hose assembly with integrated fitting for bleed nipples such as those found on Shimano mineral oil brake systems - Part #2615-2 (x2) — 11 mm bleed blocks for use with Hayes DOT brake systems All parts also available individually. NOTE: The seals on each part are designed for one type of fluid — DOT fluid or mineral oil — and should be used only on the systems they were intended for. DOT fluid and mineral oil should never be mixed in the brake system or in their respective service tools. Cross-contamination of brake fluid may cause seal failure which may result in brake failure.

Folding flat to fit almost anywhere, the Crank Brothers F10+ features ultra-fine finishing and 10 fundamental tools fixed inside a magnetic case, stamped with a Canadian Maple Leaf. Specs: - Case: Magnetized, built in bottle-opener - Hex wrenches: #2, 2.5, 3, 4, 5, 6, 8 - Screwdrivers: Phillips #2, flat #1 - Torx: T-25 - Warranty: 5 years - Weight: 94g

Professional hub cone wrenches available in multiple sizes.

With a simple twist to engage with Ninja Master series cage, this weatherproof tool box contains a 16-function metal mini-tool for basic repair and maintenance. Tools - 2 / 2.5 / 3 / 4 (L-type) / 5 / 8mm Allen wrenches - 6mm hex tool bit - T10 / T15 / T25 Torx wrenches - #2 Phillips / flat head screw drivers - 14G / 15G spoke wrenches - CrMo steel chain tool* and chain hook Compatibility - Ninja Master cage series - Ninja Universal Bracket Weight - 92 g / 3.24oz (Ninja T16+) - 40 g / 1.41oz (ToolBox) - Leverage added on 4 / 6mm Allen wrench - L-type wrench - Tool Material: Chrome vanadium steel - Tool Body Material: Carbon fiber injection *The chain tool is compatible with single and multi-speed chains up to 12 speed, NOT including Campagnolo hollow pin chains.

Park's Master Mechanic Spoke Wrench is an investment-cast workhorse made from the best steel. It's precisely machined, heat treated for hardness, then polished and plated. The result is a smooth, solid-steel spoke wrench that fits your spoke nipples and hand perfectly for easy truing and tensioning and a lifetime of use.

Chainring nut wrench for Torx 40/6mm hex

Specialized's Top Cap Chain Tool replaces your top cap and places a chain tool and spare chain quick link inside your bicycle fork's steerer tube. This way you'll never forget your chain tool. This tool can be installed in any 1-1/8th inch steerer tube that is at least 32mm deep. It's available in models that work with either aluminum or carbon steerer tubes.

- Freewheel remover for Shimano HG cassettes with center pin

- Bearing extractor set for medium bearings - (1) 6002, (1) 6003, (1) 6804, (1)6805

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Damper Sealhead, Air Spring Sealhead) - Boxxer RC C1 (2019)

RockShox, 11.4115.129.010, Service Kit, Monarch Plus (does not include air can seals)

REAR SHOCK SERVICE KIT - FULL SERVICE MONARCH 3 RT3 (2013)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, Dual Position seals) - Pike B1 (2018+)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals) - Recon Gold RL A4 (2018+)

- Trek Reaktiv Thru Shaft 200 hour service kit

RockShox, 11.4115.093.010, Service Kit, Air Can, 2011 Vivid Air

To achieve maximum suspension performance, proper setup and tuning is essential. Go to www.rockshox.com/app for suggested air spring pressure and rebound damper settings for your fork. Go to www.sram.com/service for additional product and technical information. Air spring pressure and coil spring tables are available in the RockShox® Front Suspension Oil, Air, Coil, Token, and Specification documents. For a complete list of available coil springs and Bottomless Tokens™, consult the RockShox Spare Parts Catalog. Consult the RockShox service manual for your fork for complete disassembly and assembly procedures. Tuning suggestions are starting points. It may take trying various adjustments to find the settings that work best for each individual rider and trail condition. - Includes complete right-side internals

200 Hour/1 Year Service Kit (Includes Dust Seals, Foam Rings, O-Ring Seals, Charger 2 RL Sealhead) -SID RL B2 80-100mm (2018+)/Select + B4 80-100mm (2020), SID SL Select+ C1 (2021)

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, Dual Position seals) - Lyrik B1/Pike 29+ (2018+)

Performing the right maintenance on your SRAM and RockShox products not only ensures years of worry-free riding, but will also keep performance optimal and enhance your experience on the bike. Each service interval indicates the maximum number of riding hours designated for each type of recommended maintenance. Depending on the terrain and environmental conditions in your location, your riding style, and skill level, you may see more optimum performance if you service your SRAM and RockShox products at shorter intervals.

Oil Level Adjuster (for checking and adjusting oil level) -Reverb/Motion Control Dampers /Turnkey Dampers

Factory service kits for Reba A7 forks

200 hour/1 year Service Kit (includes dust seals, foam rings, o-ring seals, Charger 2 sealhead, SA sealhead) - RS-1 RLC/RL A1 (2018+)

200 hour/1 year Service Kit (includes sealhead seals, piston seal, glide rings, IFP seals, grease) - Super Deluxe Coil (2018+)

- Premium non-solvent mobile cleaning unit - Using a proprietary natural bioremediation process, easily breaks down the heaviest of grime in seconds - Totally natural and safe for user, no hazmat labels in sight - Heats to an optimal temperature of 100.4° F/38° - Clean components with the integrated brush or use the soaking tank - Overheating security/reset feature - Easily drained: draining plug with integrated pour spout - Mobile: 4 integrated wheels, 2 with brake - Dimension: L32.3" x D20.9" x H41.3" - Weight: 51lb - Tank capacity: 40L/soaking area volume 4L (initial 40L NOT included) - Filters are not washable (initial filter included/preinstalled) - Bundle includes: 1 x 40 Liter Parts Washer, 2 x Eco Refill Fluid, 20 Liter, 1 x Eco Power Tabs

13 functions—we've gone out of our way to pack this tool with as many useful functions as humanly possible. The selection, length, and placement of each tool has been carefully thought out so that you have the right tool and can easily use it. - 13 functions - 145 grams

Brake pad spreader tool for Avid Elixir brakes.

- bearing tool for Vault, V18 or V14 models

- For installation and removal of 20t splined Shimano/ISIS bottom brackets - To be used with 1/2" driver

Chain rivet extractor for 10, 11 speed chains. Chain pin guide with 1 spare pin.

Hub cone wrenches available in various sizes

Park Tool's Replacement Chain Tool Pin (2-Pack) fits Park Tool's CT-1, CT-2, CT-3, CT-3.2, CT-5, and CT-7 Chain Tools. • Made from hardened alloy tool steel • Uses 7mm or 9/32" 12 pt box end/socket • Sold singly or in pairs

- Required to bleed Reverb 1x remotes - Compatible with Standard RockShox bleed kits - Included with remote upgrade kit and Reverb 1x post - Not compatible with SRAM brakes bleeding edge fitting

Service kits include dust seals, foam rings, oil seals, air and damper o-rings needed for basic service.

- Chrome-plated chain tool. - Compatible w/ HG, IG, and UG chains. - Extra-long knurled handle for good leverage. - Adjustable backing support braces the backplate of the chain. - Replaceable driver pin.