Hubs

The FX front hub was designed from the ground up, with modern street in mind. Thicker angled hub flanges optimize the spoke line, creating a stiff wheelset that is protected from grinds with the included Cinema CF nylon hub guards. The recessed bearings remove any chance of bearing seat stretch and ensure the hub continues to roll smooth. A 15mm Chromoly inner axle provides plenty of strength for all the grinds you can throw at it. - Axle: 15mm Hollow Chromoly Center Axle - Bolts: Chromoly 3/8" (17mm Socket / 6mm Allen) - Shell: 6061-T6 Aluminum 36-Hole - Bearings: 2 x 6902 Sealed Bearings - Cones: 7075-T6 Aluminum Push-On Cones - Guards: Cinema CF Hub Guards - Weight: 11.9oz

Refined and re-refined, the VX3 cassette hub packs in all the features and durability you want and need in a hub. The design has been updated to a more resilient floating axle system, with the tried and true 14mm heat-treated Chromoly male axle. The SDS driver system also allows you to easily switch between left or right-side drive without any additional parts. Ceramic bushings found inside the 9t driver unit eliminate any blown-out bearings, and spin directly on the axle creating room for increased axle thickness. Finally, the included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - Axle: 14mm Heat-Treated Chromoly - Axle Nuts: 17mm 7075-T6 Aluminum - Shell: 6061-T6 Aluminum 36-hole - Hub Bearings: 2 x 6902 - Driver Bearings: Ceramic Bushing - Driver: 9-Tooth - Drive Side: RHD / LHD Switchable (SDS) - Cones: Thread-On - Guards: Includes DR Rear Hub Guard and CR Rear Hub Guard - Weight: 19.6oz (w/ Guards Installed)

The updated team favorite, FX2 freecoaster hub. Featuring proven KHE based internals, a 9T dual-sealed bearing driver with additional bushing, and a super-strong heat-treated Chromoly 14mm axle with 6mm internal hex for easier maintenance. Updated with the DTC system, changing drive side only requires a driver change instead of a whole hub replacement. Slack can be adjusted from 55 degrees up to 180 degrees depending on your preference, and ships with 156 degrees slack as standard. The included nylon CR and DR hub guards keep your hub protected from grinds straight out of the box. - 9T Freecoaster - Axle: 14mm Hollow Heat-Treated Chromoly - Axle Nuts: 17mm Chromoly - Shell: 6061-T6 Aluminum 36-hole - Bearings: 1 x 6002, 1 x 7905, 2 x 6902 + Bushing - Clutch: DTC (Dual Threaded Clutch) - Cones: Threaded Drive Side and Non-Drive Side - Guards: Compatible with Cinema DR and CR hub guards - Slack: Includes 3 Slack Washer For Fine Tuning - Weight: 25.3oz (w/Guards Installed)

Boost Centerlock front hubs are designed as precision mountain tools. Featuring a one-piece axle to provide a stiff hub with rail accurate steering. To thwart mud, water, and contaminants as you power through rough trails, Boost Centerlock hubs have heavy-duty bearing seals and snaprings, that provide superior protection with ultra-low drag. - Wide flange placement - Fits 110x15mm Boost spacing - Easily serviceable with a T10 Torx and pick or pen knife - Engineered, manufactured, and assembled in Portland, Oregon USA with King Lifetime Warranty - Hub Drilling: 28 - Hub/Brake Compatibility: Center-Lock Disc - Color: Red - Spoke Interface: J-Bend - Front Axle: 15mm Thru x 110mm

WHY WE MAKE THIS Chris, our founder, and spiritual guide, the King himself, is really, in his heart-of-hearts a mountain biker. We make this hub because it's spiritually imperative that we do so, to honor the dirt that has given us so much, and to keep Chris happy. WHY YOU WANT IT Our Boost Centerlock 148x12 rear hubs use one-piece solid axles to provide a stiff platform that makes your suspension perform better and gets every one of the watts you make into the dirt. To keep mud and water out of the works they have heavy-duty bearing seals and snap rings that provide superior protection with ultra-low drag. Each one is like a rolling dream of trail riding performance. Our bearings, both steel and ceramic, have heat-treated, surgical-grade steel races that are machined simultaneously to ensure perfect matching. The quality and speed of our bearings are what you will feel (and hear) on every ride. As Chris King bearing tracks burnish they get actually get faster. A little bit of regular love (i.e. service) will keep this hub rolling for years upon years of demanding use. The patented Chris King RingDrive with 72-points of simultaneous engagement will get your power to the ground fast, provide unmatched engagement, and give you that legendary Chris King angry-bee sound. All Chris King rear hubs come with that signature, angry-bee sound. - Engineered, manufactured, and assembled in Portland, Oregon USA - King Lifetime Warranty - Canted flanges for stronger wheel builds - Patented RingDrive system with 72 simultaneously interfaced points of contact for unmatched hub engagement - Legendary made-in-house bearings - 24h, 28h, and 32h - Available with Micro Spline, HG or XD driveshell - Easily serviceable with a T10 Torx and pick or pen knife - Ceramic bearing upgrade available - Specifically designed for "BOOST" 148mm x 12mm axle standard HUB SPECIFICATIONS: - Axle Width: 148mm - Flange Diameter DS & NDS: 57.4mm - Center to Flange DS: 24mm - Center to Flange NDS: 36.3mm