Handlebars

You say you want a wide, stiff, strong, championship-winning design? Here you go. The new Descendant DH bar borrows from a rich championship-winning heritage, and adapts it to today’s aggressive courses and riders. Descendant DH bars are the command center of cornering control. - Stiff, precise, and super-wide - Made with tough 7050 alloy - Descendent geometry from TruVativ's best enduro rider’s input - Backsweep: 9° - Upsweep: 5°

An ultra-lightweight 7050 aluminum trail riser bar designed for maximum singletrack shredding. - Lightweight, optimized 7075 aluminum alloy - Micro-adjust laser-etched setup markings - 35mm handlebar diameter - 9 degree rearward/ 5 degree upward sweep - 20mm rise

- High strength 7 series Aluminium Alloy - Shot peened for increased fatigue life - Corrosion and abrasion resistant hard anodized finish - Laser etched positioning grid for easy set up - Width marks allow personalized fit adjustment - Permanent Graphics

DEITY Racepoint handlebars must pass DEITY specific impact and stress testing based on the rate of deflection product goes through in real world situations. This is just the beginning, every DEITY handlebar also undergoes a rigorous 12 to 24 month real world testing process under the most abusive riders in the world. Gradient Butting Technology allows DEITY to put material where we need it and not where we don’t, delivering a significantly stronger handlebar at a similar weight to other bars. - Intended use: Enduro and DH

BSD Raider BMX Handlebars - David Grant Signature Handlebar - Post weld heat treated 4130 - Backsweep: 11 degrees - Upsweep: 2 degrees

Adventure handlebars from FSA are double butted, tapered, and shot-peened AL6061. - 31.8mm bar clamp diameter with 34 x 21 ergonomic oval section - 125mm drop, 80mm reach - 12° side flare

The Gossamer Compact uses the same evolved shape as our high-end handlebars – shallow 125mm drop, short 80mm reach, optimized for the shape of current shifters. Rider comfort is further enhanced by the flattened top section, giving an easy platform to rest your hands on. The Gossamer Compact uses 6066 aluminum, which is double butted and tapered to put strength where it's needed and trim weight where it's not. Shot peening improves fatigue resistance, and an extra-wide bulge section in the center of the bar leaves ample room for accessories. - Double butted, tapered, and shot-peened AL6066 - 34mm ergo flat top - 110mm-wide round center section makes it easy to mount accessories - Bar width: center/center from the handlebar tails

- The FatBar Carbon is the ultimate DH race handlebar. - This ride-tuned handlebar combines the ultimate blend of strength, stiffness and shock absorption.

- The second version of the Fatbar has undergone a full structural re-design. - In keeping with the demand for wider, gravity oriented handlebars, the width increased to 800mm. - Proven high grade 7050 T6 aluminium and variable gauge taperwall construction

- D-shaped composite tubing - 6% lighter than Contact SLR Compact handlebar - 10% more "pushing" compliance compared to Contact SLR Compact handlebar for a smoother ride quality - 30% more "pulling" stiffness compared to Contact SLR Compact handlebar for cornering, sprinting, and climbing efficiency - Drop 125mm - Reach: 72mm

Dan Coller's signature Contender bars are perfect for taller riders, coming in at a comfortable 9.75" rise. The Contender bars are the first set of bars from Kink to offer pre-defined cutting grooves at 0.25" intervals. Coming with a stock 29.5" width, they can easily be cut down to 29", 28.5", 28" or 27.5" without breaking out the tape measure. Made from 13-butted chromoly tubing, and our TruTherm post-weld heat treatment process ensures these bars can stand up to all kinds of riding. Being ridden and trusted by Dan Coller daily attests to the Contender bars' strength. TECH SPECS - Rise: 9.75-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 28.6oz

- 25.4mm bar clamp - 620mm width with 10 backsweep

Profile's Largo bar uses double-butted 7075 aluminum to make a lightweight handlebar that maximizes stiffness for sprinting and climbing. A wider center clamping area easily accommodates clip-on aerobars and the extended reach means there's no compromise between an aerobar or in-the-drops position. The Largo is also shot peened and anodized for added strength and durability and offers excellent comfort due to its ergonomic bends.

The Svet TT was designed for Time Trial and Triathlon usage and features a sleek UCI compliant 3:1 wing. Strategic cable slot positioning enables streamlined internal compatibility for electronic or mechanical shifting cable management while the zero drop and upturn brake extensions provide better positioning for climbing and cornering while in the pursuits. - Weight: 210g (42cm) - Width: 44cm (center to center) - Center Clamp Diameter: 31.8mm - Clamp Width: 140mm - (44mm) - Clip Compatible: Yes - Material: Multi-Direction, Multi-layer Carbon Fiber - Pursuit Reach: 165mm (center to tip) - Pursuit Drop: 0mm - Pursuit OD/ID: 25.4 / 19.5mm - Drop Outsweep: No

Wind is the ultimate cruelty, and nowhere is it more keenly met than at the leading edge of your bike. Want to save an easy 20 seconds over 40 kilometers? Get a set of Rapide handlebars. Leveraging our countless hours of Win Tunnel testing, we designed the Rapide bar to cut through the wind with knife-edge efficiency, and at the same time, provide the utmost comfort while hammering at the front. A textured surface on the tops ensures secure and comfortable grip, even when wet; there's a recessed step that sets the bar wrap flush with the tops; the airfoil is offset forward to offer greater forearm and knee clearance; and, at 225 grams, the Rapide is the lightest aero bar in its class. Aerodynamic performance without compromise. This is the leading edge. - Aerodynamically engineered to save 20+ seconds over 40km vs. a round bar - Optimized blend of high modulus carbon fiber materials yields lightest-in-class aero bar at 225g (size 42cm) - Innovative features, like textured tops and a smooth bar tape step, enhance your experience - Bend: 125mm drop x 75mm reach

The Service Course SL-70 is the bike fitter's go-to bar. The short reach to the hoods allows a proper fit without compromising stem length and steering control. With the revised ramp angle, proper fit is now achievable on even the most challenging setups. The 70mm reach is the shortest of Zipp's Service Course bars. Together with its 128mm drop, the bar is deal for riders preferring a low body position. Whether it's a rider with a shorter torso or a bigger rider getting aero by pairing this bar with a long stem, this bar helps put just about any cyclists into their optimal position. - Distinctive Zipp cosmetics - 7050 aluminum for light weight and durability - 70mm reach and 128mm drop for a short-low position - Matte Black nano blast aluminum - Clip-on Compatible - Lifetime warranty

This is Zipp's innovative all-road handlebar, the Service Course SL 70 XPLR. The bar's moniker, XPLR, exemplifies the desire to explore the world with an expanded definition of cycling on a drop bar bicycle—from paved roads onto gravel, mud, dirt, and even single track. The Service Course SL 70 XPLR helps you go faster by placing your body, starting with your hands, in an optimal "comfort zone" position for hours of rough riding over mixed terrain. Today's riders demand a few things out of their cockpit, whether they are doing a two hour training ride from home or a 200 mile gravel adventure: comfort, control, and the ability to carry what they need. We met these needs by creating a bar with shallow and wide drops, specifically focusing on two crucial metrics: outsweep and flare. Outsweep is created by rotating the drop below the brake perch outward. Flare is created by rotating the entire drop above the brake perch outward. - Distinctive Zipp cosmetics - 70mm Reach and 115mm drop allow a comfortable hoods position and a shallow drops postion - 5° drop Flare and 11° drop outsweep creates a drops position 6cm wider than hoods - Ergonomic top with 3° backsweep - Lifetime warranty

The Pro PLT Compact handlebar is constructed of light and strong AL-2014 DB aluminum. It features a compact bend for an ergonomic position while riding in the drops.

World Cup quality performance, developed with the pros. SPANK Industries' legendary SPIKE 800 Race handlebar is the 5th generation of the SPIKE Race handlebar legacy, developed in coordination with some of the world’s top DH and Enduro pros. A unique construction of Super 6 alloy, processed with SPANK’s patented CNC bending and Dual-Extreme-Gradual Taper (XGT) technology makes the SPIKE 800 Race handlebar a stronger, safer, performance-optimized component for the weight-conscious gravity rider. The race-tuned geometry and competitive weight make this bar the perfect solution for AM/Enduro to Downhill Race. SPANK's SPIKE 800 Race is the handlebar of choice for Nicholi Rogatkin, Thomas Genon, Tomas Zejda and many more. - Key technologies: Dual XGT, CNC Bending, Impact Ends, MGR, Super 6 Alloy - Material: MGR Super Six Alloy - Weight: ±300g (5mm) / ±310g (15mm) / ±320g (30mm) / ±330g (50mm) - Diameter: 31.8mm - Rise: 5mm / 15mm / 30mm / 50mm - Length: 800mm (Adjustable to 740mm) - Geometry: 4° up x 8° back - Finish: Shotpeen anodized, decal logos

As the name suggests, the Williams bars are Nathan Williams' signature handlebars and feature all his preferred geometry. The 9.25" rise is a traditional height, without being either too tall or too short. The unique 1.5-degree upsweep is just slightly up from most traditional bars, and the 11-degree back sweep is slightly less, creating Nathan's preferred feel. The 13-butted chromoly tubing construction, and TruTherm post-weld heat treatment process ensure these bars have no problems standing up to Nathan's insane level of riding. TECH SPECS - Rise: 9.25-inches - Width: 29-inches - Backsweep: 11 Degrees - Upsweep: 1.5 Degree - Tubing: 13-Butted 4130 Chromoly Steel - Heat Treatment: TruTherm Post-weld Heat Treated - Weight: 27.8oz

The Eagle bars are our first ever set of 4-piece bars! Available in multiple heights to fit your preference, all Eagle bars maintain the same width and comfortable sweeps. Made from straight gauge 4130 chromoly steel tubing, combine with our TruTherm post-weld heat treatment process, these bars can take a beating. The dimensions and bends used on the Eagle bars give the classic 4-piece design a modern and updated look. TECH SPECS - Rise: 9-inches and 9.5-inches - Width: 29.5-inches - Backsweep: 12 Degrees - Upsweep: 1 Degree - Tubing: Straight Gauge 4130 Chromoly Steel - Heat Treatment: TruTherm Post Weld Heat Treated - Weight: 37.7oz (9") / 38.5oz (9.5")

TruVativ's tough Hussefelt Comp Riserbar is made from butted aluminum for a long fatigue life and great strength. The wide bar and high rise gives you an upright position for greater control in technical sections and confidence on steep descents.

- Cam Zink designed bars with unique upsweep and backsweep - 9.5 deg bend x 4.5 deg upsweep - Cut marks to match Zink's preferred widths for Slopestyle, Dirt Jumping, Downhill, and Trail - Made from custom gradient butted 7075 T6 aluminum - 800mm wide, 31.8mm clamp - Third party online sales strictly prohibited by manufacturer

Specialized's Expert Alloy Shallow Bend Handlebar offers the same ergonomic benefits as the S-Works version, delivering a strong and affordable bar with no compromise. - Premium butted aluminum, high-strength design - Ergonomic top perch alleviates pressure on hands; smooth transitions for fit & comfort - Shallow bend drop design: 123mm drop x 75mm reach - UCI legal, compatible with Shimano, SRAM, and Campagnolo controls - Front of bar optimized for dual-cable routing

The deep aero wing section on Profile's full carbon Prosvet Base Bar will slice through the wind quickly and smoothly. It has ergonomically shaped brake extensions for awesome comfort. Plus, with a center clamping section wide enough to accept any Profile Design clip-on aero bar, the Prosvet puts you in an incredibly aero position. Light, stiff and fast, this bar will have you breaking your own records!

In terms of both comfort and performance, anywhere that your body touches the bike is of the utmost importance. That's why we designed the Hover Alloy Handlebars to excel on both fronts. Starting with the construction, they're made from our Premium Butted Aluminum for a nice overall weight and high rigidity. And for comfort, much of it boils down to fit. Along these lines, they feature a shallow drop & bend that's extremely comfortable, while they also have a 15mm rise to help accommodate a wide fit range. For added stability we've added 12 degrees of flare at the drop to give that wide stance. - Constructed from 6061 Butted Aluminum for a high-strength design. - 15mm rise provides a wider range of fit. - Shallow Bend Drop: 103mm drop x 70mm reach x 12d flare

Engineered for endurance riding, the ultralight Contact SL D-Fuse handlebar offers compliance and ergonomic fit for the most demanding conditions. FEATURES: - Proprietary D-Fuse shaping on the tops for compliance and lightweight. - 8-degree flare in the shallow drops puts the hand and wrist in a comfortable and efficient position. - Compatible with Contact SLR and SL Aero and AeroLight stems for full internal cable routing. - Ergonomically shaped contact points fit the hand and palm from various angles, alleviating fatigue and numbness that can occur over long miles. - Ultra-light aluminum for optimal stiffness at a lightweight. - 38% more compliant and 16 grams lighter than the previous Contact SL D-Fuse handlebar. SPECIFICATIONS - Weight: 264g (420mm) - Bar Clamp Diameter: 31.8mm - Width: 400/420/440mm - Reach: 125mm - Drop: 72mm - Rise: 0° - Backsweep: 0° - Outsweep: 0° - Flare: 8° - Material: Alloy

The Service Course SL-80 provides comfortable and efficient positions on the bar tops, brake hoods, or down in the drops. The bar allows a neutral wrist position on the drops and a flat brake-hood transition. This minimizes the need for up-rotated bars. Drops are angled outward by 4 degrees, reducing wrist strain. Named after its 80mm reach to bring the hoods and control levers back where you want them. The ergonomic 125mm drop places the angled drop position where you can easily reach it while maintaining a neutral wrist angle. The SL-80's rounded bar top is clip-on compatible. Forged from lightweight 7075 aluminum. - Distinctive Zipp cosmetics - 7050 Aluminum - 80mm reach/125mm drop designed to fit a large number of riders - Clip-on compatible - Lifetime warranty

When it comes to matching style with function, Zipp's stalwart Service Course 80 handlebars now have an option for those who prefer an ergonomic flat top. The Ergo version retains the same 80mm reach and 125mm drop of the existing Service Course 80 bars, with an ergonomic bend for the rider who likes reaching down to, rather than into, the drops. Lightweight, stiffness, and comfort: the Zipp Service Course line provides the right fit for all rider types. - New flattened bar top and 3° backsweep for a neutral wrist position on the tops - 7° ramp angle for a flat transition to the hoods and 4° outsweep at the drops - 80mm reach and 125mm drop for a medium-high position - 6061 aluminum for low weight and durability - Di2 RS910 junction compatible - Compatible with clip-on extensions (sold separately)

- DH Race tuned award-winning alloy handlebar design, developed with World Cup professionals - Injected proprietary foam Vibrocore provides vibration damping to reduce arm pump and hand-numbness - Increased strength and stiffness compared to conventional alloy bars - Shot-peening and anodizing enhances fatigue life even further - Adjustable to 740mm Features - Key Technologies: Vibrocore, Dual XGT, CNC Bending, Impact Ends, MGR Super 6 Alloy - Material: MGR Super 6 Alloy - Weight: ±340g (15mm) / ± 350g (30mm) / ±360g (50mm) - Sweep: 4° up x 8° back - Finish: Shot peen anodized, decal logos