Cables

Jagwire's Open End Caps for Shift Housing are quality ferrules that put the finishing touch on your shift cable housing sections. They reinforce them so they stay straight and allow the cables and derailleurs to operate as smoothly as possible.

Jagwire's Brake Noodles feature stainless-steel tubes with aluminum ends for durability and excellent performance.

Jagwire's Shift Cable Tips are made of lightweight, corrosion-resistant and durable aluminum and are the right size to nicely fit over the ends of shift cables. These caps are crimped in place on the cables to prevent fraying and ensure your cables last a long time. The tips come in Gold and Silver so they also add a little style to your bike. - Each Bottle contains 500 tips

Designed to work seamlessly with Jagwire's Mountain Pro Hydraulic hose (sold separately), Jagwire's Mountain Pro Quick-Fit Adapters are the perfect way to optimize braking performance and durability. This adapter kit contains all the components required for Hope brakes and includes enough hardware for one bicycle. Compatible with the following Hope brakes: - Tech 3 X2 - E4 - V4 - Race Evo X2 - E4 - M4 - Tech Evo X2 - M4 - V2 - Race X2 - Tech X2 - M4 - V2 - Mini - Mini Trials - Mono Mini - Mono M4 - 6TI - Moto V2 - M6 - Hope Banjo

Jagwire's Sealed Shift End Caps are the important housing ferrules placed on the end of housing sections to optimize your shifting. They are available in 2 types to fit most housings and they feature small rubber O-rings to help prevent moisture and grit entering the housing and fouling your shifting. These ferrules are best used with derailleur cable and housing.

Jagwire's Lined End Caps are nice ferrules designed for the ends of shift cable housing sections. They feature a small nylon extension on the end that helps reduce friction and adds protection for coated cables, too. You get a bottle of 50 for all your bicycle setup needs.

- 4mm compressionless housing - Slick-Lube liner (SL) - Housing length: 50m

- 4mm compressionless housing - Housing Length: 50m - Shift Housing Diameter: 4mm

- 5mm derailleur housing

Box of 10 DOT Hydraulic Hose - 2000mm hose length Compatible with: - SRAM G2 Ultimate, G2 RSC, G2 RS, G2 R; - Guide Ultimate, Guide RSC (B1), Guide RS (B1), Guide R (B1); - Avid XX World Cup 2010–2011, XX 2010–2011 - Avid Juicy Ultimate, Juicy Carbon, Juicy Seven, Juicy Five

Box of 10 DOT Hydraulic Hose - 2000mm hose length Compatible with: - SRAM Guide RSC (A1), Guide RS (A1), Guide R (A1) - Level TL (A1) - DB5 - Avid Elixir R, CR, CR Mag, 5, 7, 9, X0, XX 2012–2016, XX World Cup 2012; 7 Trail, 9 Trail, X0 Trail

Box of 10 Mineral Hydraulic Hose - 2000mm hose length Compatible With: - XTR M9120, M9020, M988, M985 - Saint M820 - Deore XT M8120, M8100, M8020, M8000, M785, T785 - SLX M7120, M7100, M7000, M675, M666 - ZEE M640 - Alfine S700

- 4mm compressionless housing - Low friction polymer liner - Housing Length: 200m

The Kink Linear brake cable features an outer linear strand housing, which greatly decreases bind when the cable twists during tricks. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Length: 50" - Lug: Traditional cast - Weight: 2.5oz

Includes 2 replacement knarps for Desist brake set. Use one for front brakes, use both for dual-cable gyro setups.

Kink's One Piece Cable system incorporates all the great features found in the DX linear cable and creates a simpler brake cable system requiring minimal setup. The three preset straddle cable lengths fit with all modern frames, and the remaining straddle cable length can easily be trimmed off. This single unit cable system greatly simplifies brake installation, reduces maintenance, and increases braking stiffness. Note: The One Piece Cable system requires a slotted cable guide and cable stop and works best with modern frames using a 245mm cable stop-to-mount distance. Tech Specs - Housing: Coated linear strand - Wire: 1.5mm Pre-stretched slick wire - Length: 50" - Lug: Two-piece bind-free brass - Fits: Frames with 245mm cable stop distance - Weight: 3.0oz

- Combination straddle cable and hanger - Includes knarp

The Kink Linear DX cable features an outer linear strand housing, which decreases bind when the cable twists during tricks. The custom brass lever lug allows the inner wire to twist freely within the brake lever eliminating twist and bind even further. The inner 1.5mm cable is ground smooth to create an even smoother, drag-free pull. Aluminum ferrules prevent housing failure at both ends, and can easily be refitted after cable trimming. TECH SPECS - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Length: 50" - Lug: Two-Piece Bind Free Brass - Weight: 2.0oz

A truly one-size-fits-all solution, the Kink Lower Gyro Cable features three sets of brake cable end lugs that can be trimmed off after the correct cable length is chosen. The dual-cable system fits with all standard 990-style brakes and frames, and fits most popular gyros. The dual-cable stop plate bolts cleanly to existing frame cable stops, for perfect dual-cable routing. TECH SPECS - Size: Universal - Housing: Coated Linear Strand - Wire: 1.5mm Pre-Stretched Slick Wire - Lug: Multi-Length Trimmable Lug System - Weight: 3.4oz

The Kink Upper Gyro cables are a uniquely designed dual cable system and are available in two lengths to work with Kink-specific brake levers or the universal size to fit most other popular brake levers. The two ultra-smooth pre-stretched inner wires are combined into a single, cast lever lug, which brings the smoothness and stiffness of the dual-cable system to traditional brake levers without any protruding parts. TECH SPECS - Housing: Coated linear strand - Wire: 1.5mm pre-stretched slick wire - Lug: Unique, single, cast lever lug - Weight: 2.3oz

Traditional bolt style straddle cable hanger. Product Specifications - Size: Universal - Material: Steel - Weight: 0.6oz

Straight brake cable featuring a 1.5mm pre-stretched inner cable with a tight coil housing and steel cable ends. Product Specifications - Length: 50" - Weight: 3.4oz

RockShox's Reverb Cable/Hose Line Guides are a great way to route dropper posts on frames without integrated guides. They secure with a zip tie, and feature a wide mouth that allows for cable articulation as you drop and raise your post.

Stainless steel cables are extruded to provide a smooth, low-friction surface.

- Front or rear brake - MTB specific - 1.5mm stainless cable

- Left and right shifter compatible - Road and MTB compatible - 1.1mm polished stainless steel cable

SRAM's Cable Housing/Hydraulic Line Rotating Hooks secure your cable housings to hold them the way you want them, keep them from hitting each other, and making rattling noises, and they provide a tidy custom look, too.

SRAM's Line/Housing Frame Protectors are rubber covers that simply press onto your cable housings and or hydraulic lines to prevent the housings from hitting the frame and rattling or damaging the finish. There are 4 protectors in each package.

- Front or rear brake compatible - Road specific - 1.5mm polished stainless steel cable

- For either front or rear shifter - Road & MTB compatible - 1.1 polished stainless steel cable