Specialized Gear

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

For Dissident II, we collaborated with powerhouse athletes, Loïc Bruni and Finn Iles, to design a helmet that would meet the highest demands of downhill mountain bike racing, in terms of confidence, a modern-styled fit, and breathability.With five strategically placed EPS foam inserts, we’re able to tune for higher and lower density foam based on where it is being configured inside the helmet—allowing us to maintain a light weight and still manage energy. The use of a softer foam density allows more energy to be absorbed in an impact, transferring less to the rider. Dissident II also provides added confidence through its Mips Evolve Solution—that helps to redirect rotational movement away from the head. In this Evolve Solution, we utilized fabric pocket attachments inside, reducing creakiness.Remaining cool is more than a state of mind, and it’s hard to keep your composure when things get hot—specially when your head feels like its in a sauna. That’s why instead of focusing on more vents, we focused on better vents. Built from the inside out, the Dissident II ventilation system features a hood scoop to channel a flow of cool air in, and purpose-placed vents that direct the warm air out—letting your head stay cool and comfortable in any situation.Keeping this helmet light was of high importance. In a race context, feeling light and mobile leads to faster reactions, and reduced fatigue between the tape. With the EPS foam insert construction, the helmet remains very light while still offering big protection. While we can’t speculate on everything that was going through Finn Iles’ head during his 2022 winning run at Mont-Sainte-Anne—we know what he wasn’t thinking about… Whether you’re taking the stage to drop in on your first winning World Cup run, or chasing your own championship on the local enduro series, Dissident II has you covered.For helmets sold in the U.S. and Canada: Complies with U.S. CPSC Safety Standard for Bicycle Helmets for Persons Age 5 and Older. - 3 Layer Construction: Carbon Shell / Poly Carbonate / EPS. - 5-unique pieces of EPS tuned to optimized performance in each specific location. - Mips Evolve Solution: Fabric pocket attachments to reduce bobble head and creakiness. - Ionic Plus Fabric anti-microbial pad kit. Replacement crown pad and two sizes of emergency quick-release cheek pads included. - Breathability optimized with hood scoop. - Sizes: S, M, L, XL (4 Shell sizes). - Travel Bag. - D-Ring Buckle. - Weight: Medium - 940g.

When the moment comes for an attack in the hills, a long solo move, or a full gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongue-less sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, less injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

If you push the limits of downhill speed and big air, the S-Works Dissident with ANGi is for you. That's because it's the lightest, most-ventilated, and technically advanced carbon fiber full-face mountain bike helmet out there. To help make sure of it, our 3D sculpted cheekpads and 4th Dimension Cooling System keeps things airy in the heat, while the Carbon Matrix shell keeps it light enough for all-day comfort. Our new ANGi Crash Sensor gives you and your loved ones peace of mind like never before—when combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA to provide GPS-based activity tracking. - Engineered to protect World Cup downhill and gravity riders - Meets the ASTM DH safety testing standards for impact protection and chin bar performance - Lightweight Carbon Matrix shell-target weight 1000g - 3D-sculpted cheek pads and updated crown pad design for improved ventilation and a more comfortable secure fit - 4th Dimension Cooling System and ventilation provides superior comfort - Magnetic chin strap buckle improves comfort and allows for easy, one-handed use - Helmet EJECT system compatible - Leatt brace compatible - Speaker compatible - Includes a padded travel bag with micro-fleece liner and external goggle pocket - Removable washable liner and cheek pads - MIPS-equipped - Integrated ANGi crash sensor

Finding the perfect cross country race shoes can be tough going, but with the S-Works Recon shoes, we've made the choice simple. Exceptional power transfer? Check. Gram-counter approved? Check. Undeniable style? You got it. With the S-Works Recon you get XC-focused mountain bike shoes that truly have no compromises. We took a no-holds-barred approach to transferring every bit of your power to the pedals. The sole utilizes a rubber toe and heel for superior off-the-bike traction, while the pontoons are made of a harder TPU to provide excellent stability and power transfer to the pedal. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With all of these features combined, you can be sure that we've kept in line with the motto "every watt is sacred." In the comfort arena, we kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. We also took luxury into account by designing the S-Works Recon to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy Boa dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial-in your fit. The S-Works Recon embodies everything we know about footwear, compacted into one shoe with no compromises, no shortcuts—just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 270g (1/2 pair, Size 42)

From recent road converts, to sultans of gravel speed, the new S-Works Recon delivers pavement-bred performance to the gravel discipline. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is an intentional fit, that's stiff, comfortable, and tunable—to put the power down. Inside and out, Body Geometry technology is baked into the S-Works Recon. Driven by nearly two decades of development and validated by data, we ensure there is no pain points, only performance, where your body meets the bike. Through our creation of the Varus Wedge, Longitudinal Arch, and Metatarsal Button, your feet stay in their most optimal position when pedaling—as well as in line with your knee and hips. - High-density pontoons and new shims allow riders to tune their pedal interface for maximum efficiency and a road-like pedal platform - Features Body Geometry technology by way of the Varus Wedge, a Longitudinal Arch, and Metatarsal Button - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Using an Internal I-Beam adds stiffness and strength—eliminating the need for additional bracing and allowing the shoe to stay extremely lightweight - Zoned reinforcement across quarter and forefoot maximizes support while the updated BOA® routing improves lockdown—eliminating the need for a toe strap - Additional 3mm, 6mm, and 9mm pontoon shims for leg length discrepancy and cleat stacker available through Specialized Rider Care. - For a wider fit — the new base plate is 4mm wider than the standard width (8mm wider than S-Works Recon Mountain Bike Shoes). - 280g for a size 156

The S-Works Torch is the latest evolution of the winningest footwear in cycling. Using Body Geometry together with biomimicry, data science, and obsessive craftsmanship, we engineered a shoe so thoughtfully constructed that you'll forget you're wearing it. Leveraging data science, we refined every detail of the S-Works Torch's upper for improved fit and performance. The BOA cable is shifted down and angled, preventing lift on the ball of the foot and delivering power-enhancing structure while eliminating unwanted pressure or pinching. Adaptive materials allow natural movement of the foot where needed for comfort, while data-driven zonal reinforcement keeps the foot secured for crisp power delivery and optimal efficiency. Guided by more than 100,000 foot scans from our RETÜL fit data, we recognized that both a standard and a wide carbon base plate would best serve the spectrum of human foot shapes. An internal I-Beam adds stiffness and strength, eliminating the need for additional bracing. The result is a 20-gram weight reduction, enhanced efficiency, and immediate power transfer. Following RETÜL bio-mechanical data, we created an asymmetric heel cup that supports natural knee alignment and delivers the positive hold riders love while enhancing comfort by accommodating more room for the Achilles heel. The S-Works Torch is scientifically crafted to disappear on your feet and off the front. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retul foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retul data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Updated BOA cable routing improves lockdown while reducing pressure across anterior ankle ligaments. - Independent alloy BOA S3-Snap Fit System for on-the-fly micro-adjustment, backed by the BOA Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - IMPORTANT FOR WIDE FIT—the new base plate is 4mm wider than the standard width (8mm wider than S-Works 7).

The all-new S-Works Torch Lace delivers the timeless, refined style of a lace-up with an unprecedented level of efficiency, lightweight, and comfort thanks to Body Geometry. It all adds up to a shoe that disappears on your foot, yet begs to be seen. Like every shoe we make, the S-Works Torch Lace starts with Body Geometry - identify a problem, solve it with design, and validate it with science - to improve comfort, increase performance, and reduce the chance of injury for every rider. Comfort: The S-Works Torch Lace utilizes our new forefoot shape - 4mm wider than the S-Works 7 - based on extensive 3D foot scans and Retül data. The upper features remapped zonal layering throughout. It remains incredibly supple to adapt to different foot shapes, yet won’t stretch over a long day in the saddle to ensure a secure, consistent fit. An asymmetric heel counter reduces hard touch points against the ankle and still delivers knee stability validated by our Human Performance team. Efficiency: Every Body Geometry shoe optimizes ankle, knee, and hip alignment for a stable and pedal stroke with our patented Varus Wedge, a 1.5mm outward tilt to the outsole. Thanks to the lightweight retention of laces and watching every gram - from the carbon outsole to the upper material - the S-Works Torch Lace weighs a feathery 200 grams in size 42. With an internal ‘I-Beam’ the carbon outsole provides the ideal stiffness-to-weight ratio for big efforts without adding excess grams, optimized by working with the best riders in the world. Style: Beauty is in the eye of the beholder, and those that see the S-Works Torch Lace will get to admire them as long as they can hang on your wheel. With classic lines and understated colorways the S-Works Torch Lace is at home whether you chase finish lines or mountain tops before sunset. - New upper features reinforcement in key zones while also offering adaptive fit zones to create a disappearing fit on the foot. - Based on data gathered from Retül foot scans, the new base plate is 4mm wider at the ball than the previous generation of S-Works 7 shoe. - By optimizing its construction, the new carbon plate is 20g lighter than the S-Works 7. An internal "I-Beam" ensures it maintains the same stiffness as the previous generation. - An updated last makes use of Retül data to better match the shape of riders' feet, sloping more towards the lateral side to give a snug, close-to-foot fit. - Asymmetrical heel counter supports the medial side while removing material from the lateral side, allowing for a lower collar. - Laced closure maintains the most opportunity to customize fit along the entire foot. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. Three-bolt cleat pattern fits all major road pedals. - Non-slip, replaceable heel tread with internally recessed screws for security. - Approximate weight: 200g (1/2 pair, Size 42).

Specialized spent some time thinking how to describe the S-Works 6 XC mountain bike shoes, and really, their selling point is pretty easy—they're the lightest, most connected XC race shoes in the world. They're not just light, although they are only 270 grams per shoe, but it's more about the blend of low weight and incredible performance. They feature the stiffest and lightest carbon fiber outsole for pedaling efficiency and feedback, while they borrow some unparalleled traits from the road version of the S-Works 6 for explosive speed and superior comfort. The speed comes as a direct result of an incredible fit and better connection, delivering more efficiency and power to the pedal. The PadLock heel, combined with revolutionary strong and lightweight materials in the upper, creates a snug fit that's incredibly secure. The Result? You have a shoe that helps transfer more of your energy into the pedals when you crank up the watts. Add to that the legendary performance and adjustability of the dual-Boa closure system and the S-Works 6 becomes more than just a shoe, it allows you and your bike to work seamlessly together with maximum efficiency. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - The stiffest and lightest FACT plate. Stiffness Index 13.0. - Dyneema Cubic Tech directional fibers are thermo-bonded to create no stretch zones for ultimate connection. - Independent Boa S2-Snap dials for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - PadLock molded heel and one-piece stroble upper for superior fit. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, rubber heel tread. - Form Fit last with roomy toe box for ultimate connectivity and comfort. - Two-bolt cleat pattern fits all major road pedals. - Ceramic printing for lightweight durability - Approximate weight: 270g (1/2 pair, size 42)

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

On gravel, style is a state of mind. The new S-Works Recon Lace will put a smile on your face and style in your pace every time you head out the door. A timeless look combined with tried and true Body Geometry features and the performance and durability that have become hallmarks of S-Works Recon shoes. Plus, you’ll leave everyone in the group asking, “What shoes are those?” - Built with Purpose. Backed by Science. Our Body Geometry trio of the Longitudinal Arch, Metatarsal Button, and Varus Wedge work together to increase efficiency, optimize hip, knee, and foot alignment, and reduce injury risks. - Our stiffest and lightest XC FACT carbon plate maximizes power transfer: Stiffness Index 13.0. - PadLock™ heel construction cradles the heel and is proven to improve acceleration. - Titanium alloy cleat nut. - SlipNot™ rubber heel and toe tread for confident traction on all terrain with removable toe studs. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Two-bolt cleat pattern fits all major MTB pedals.

Specialized sums up their S-Works 6 road shoes in two simple phrases: explosive speed and superior comfort. The S-Works 6 is Specialized's stiffest and most efficient shoe ever. Combine that with a Body Geometry sole and footbed that optimizes hip, knee, and foot alignment, the Padlock heel system that locks your feet into the shoes, and independent Boa closures for a custom, on-the-fly fit, and you have one incredibly comfortable, efficient pair of shoes. Asymmetrical titanium cleat bolts rotate to allow for even more flexibility and range for cleat positioning, while replaceable heel treads increase shoe longevity. Plus, strategically placed no-stretch fabric improves your efficiency and connection to the bike.

Out in The Great Nearby, whether by bike or by hike, the weather can be unpredictable. Which is why we've poured our combined technical know-how into our Räven Anorak. Fjällräven's classic Räven jacket with Specialized's on-bike-fit makes this the perfect jacket for both biking and hiking adventures. Features a torso in G-1000 Lite fabric. Four-way stretch on the back and lower sections provide wind resistance where it's most needed, as well as greater freedom of movement. Reflective details on the articulated, engineered sleeves have been optimized for bike riding. Two-way zippered ventilation openings in the sides. Secure zippered hand pockets and inside mesh pockets that are reinforced at the bottom. Two chest pockets with snap buttons—perfect for your wallet, phone, and other essentials. Easy to pull on, with an adjustable cinch at the hem. Stowable hood. Part of the Specialized/Fjällräven Exchange series for urban rides and bikepacking adventures. - Classic anorak pullover with a half zip opening. - Two chest pockets with snap closures. Left side chest pocket also has a secure-zipped entry. - Two secure zippered hand pockets. - Half-zip vents on either side with two-way zippers for breathability. - Adjustable hem cinch with locking cord pullers around the back hem. - Lightweight, packable hood stows in the back collar. Hood has a cord-pull adjustment around back of head. - Reflective details at hip and sleeve opening. - Articulated design for riding position.

Whether it's a sweltering climb at the Vuelta or a toasty afternoon in your hometown, we developed the S-Works 7 Vent to keep you comfortable on even the hottest days. With new features like the Vented Mouthport toe box and an all-new engineered mesh upper, the S-Works 7 Vent delivers exceptional ventilation and aides in sweat evaporation. Pair that with World-Tour-proven features like our Body Geometry Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button, the PadLock heel, a FACT Powerline carbon outsole, and machined alloy BOA S3-Snap dials, and you're set for any ride or race, no matter how high the mercury rises. For power transfer, our PadLock heel construction cradles the heel to ensure optimal power transfer. In fact, its been scientifically-proven to improve acceleration. Pair that with two independent, alloy BOA S3-Snap dials backed by the BOA Lifetime Guarantee, and you can fine-tune your level of foot-hold on-the-fly. The Vented Mouthport toe box pulls air in through the front of the shoe and channels it around your feet, while the entirely-new, engineered mesh upper and tongue let that air flow freely throughout the shoe, aiding in both cooling and sweat evaporation. Along with the engineered mesh in the upper, we added a layer of Dyneema Mesh to keep strong hold of your foot, ensuring pro-proven power transfer. The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry Features, Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Non-slip, replaceable heel tread with internally recessed screws for security. - Three-bolt cleat pattern fits all major road pedals. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Uses the same 66-gram FACT Powerline carbon outsole found in our EXOS line. With its mesh-covered ventilation holes, the sole furthers the shoe's cooling properties, all while dropping weight to 233 grams (1/2 pair, Size 42).

When the moment comes for an attack in the hills, a long solo move, or a full-gas sprint for the line, every watt counts, which is why we designed the S-Works Ares to be the most efficient and powerful performance shoe ever made. We combined decades of Body Geometry development with obsessive innovation working with the world's best athletes to completely reimagine the race shoe. An entirely new, patent-pending closure system, Dyneema-reinforced tongueless sock, and ultra-stiff FACT Powerline carbon outsole eliminate foot roll, reduce pressure on tendons, and transfer every ounce of power to the pedals for unprecedented performance and comfort. It's 1% faster than any shoe we've ever made, and at the finish line, that's all that matters. - The key to more comfort, fewer injuries, and higher power output comes from our ergonomically designed, scientifically tested Body Geometry features: Longitudinal Arch, Varus Wedge, and personalized insoles with a Metatarsal Button. When used in harmony, these three features align the hip, foot, and knee, while also limiting medial/lateral knee movement and maintaining good circulation down to your toes. - Patent-pending closure design secures the foot for extreme, out-of-saddle efforts, locking the metatarsals and preventing lateral roll. - Dyneema is sandwiched between layers of synthetic mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Our stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15. - Independent BOA Li2 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Titanium alloy cleat nuts can rotate to position cleats 5mm rearward and fits all major 3-hole road pedals. - Approximate weight: 220g (1/2 pair, Size 42)

At a mere 150 grams, the S-Works EXOS are the lightest cycling shoes to ever come with a Boa® dial. And not only are they ridiculously light, but they still have all the features that are synonymous with the S-Works label. They’re still at that World Tour level, just ridiculously light. To get the weight down to the 150-gram mark without sacrificing power transfer, we implemented all the engineering bells and whistles we could think of. And when that wasn’t enough, we thought up some more. The carbon outsole was developed using an advanced form of Finite Element Analysis and pressure mapping to pull out material where it wasn’t needed. This allowed us to keep crazy-high stiffness numbers, too. For the uppers, we completely removed the heel counter. And with a little help from the space-grade Dyneema® mesh and some CubicTec reinforcement, the heel molds to the back of your foot, so nary a watt is wasted. Lastly, we developed a new Warp Sleeve vamp that let us get rid of the toe box, and this further cut down the weight and increased the comfort. Of course we couldn't do any of the above without including our coveted Body Geometry features, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but to also increase efficiency and to reduce the risk of injury. The S-Works EXOS are the lightest cycling shoes to ever have a Boa® dial—experience the feeling of lightness. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Our lightest FACT Powerline™ carbon plate maximizes power transfer: Stiffness Index 13.0 - A revolutionary Dyneema® Mesh allows us to achieve weight without sacrificing hold for the ultimate connection and comfort. - BOA IP1 Fit System for on-the-fly micro-adjustment, backed by the Boa Guarantee. - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a Warp Sleeve vamp for the ultimate in connectivity, comfort, and speed. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 140g (1/2 pair, Size 42)

Redefine Your Comfort Zone. To make a DH-certified full face with the ventilation and fit of a half shell, our development team took a fully integrated approach when creating the Gambit. Every component was engineered utilizing a comprehensive approach resulting in truly breakthrough performance where the Gambit delivers more than the sum of its parts. - Combines a lightweight carbon fiber shell, structurally specific polycarbonate backing, and five optimized pieces of targeted density foam (patent pending) for reduced weight, optimized fit, and increased ventilation. ASTM DH (1952) certified. - Tune a more precise, personalized fit thanks to Gambit's adjustable Integrated Fit System that accommodates variations in head shape and occipital base. - Occipital base adjustment personalizes fit for comfort and allows you to tune helmet angle to ensure that your helmet and eyewear stay perfectly synched. - 4-position adjustable cheek pads provide fit refinement for any head shape. - Integrated, fixed visor with a breakaway feature provides a wide field of view while protecting against trail debris. - Average weight: 640 grams (medium). - Increased airflow and improved ventilation from the SBC Integrated Fit System does away with the excessive padding of a traditional full-face friction fit. - MIPS SL with our exclusive perforated backing integrates MIPS technology within the helmet padding and reduces moisture retention while increasing breathability. - Computational Fluid Dynamic design integrates the maximum volume of internal channeling for optimal airflow through the helmet. 4D brow cooling provides a gap between the helmet and forehead, drawing airflow into internal air channels at every speed. - This helmet is ANGi ready, with a fit system mount designed for easy integration with our ANGi crash sensor.

The most aero road helmet in the peloton now breathes better. The S-Works Evade 3 was reinvented from the inside out to cool better, making it the fastest choice for more stages. Through extensive Computational Fluid Dynamics and Win Tunnel testing, we created a rear "diffuser" that helps minimize drag and improve ventilation. The diffuser helps optimize aero performance by allowing air to release easier and improves ventilation by drawing 10% more air through the helmet at a given speed. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - Enlarged front vents help increase ventilation. - Rear Diffuser for aero and ventilation benefits. - MIPS Air Node is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - Dual-density optimized EPS foam.

The S-Works Prevail 3 helmet is perfect for riders who value the comfort and thermoregulation benefits that superior ventilation delivers. It is the ultimate all-around helmet that excels in hot conditions, strenuous climbs, and mountainous stages. With a never-ending quest to push the limits of ventilation, we eliminated air-blocking foam "bridges" from the center, effectively creating thru-air channels that increase the surface area of ventilation by 24.5% compared to the S-Works Prevail II Vent helmet. The all-new S-Works Prevail 3 has the most ventilation area of any helmet we have ever made. When a helmet is impacted, its job is to dissipate the energy of the impact. The conventional approach to helmet design is that more foam (EPS) means better energy management. We re-wrote the book on cycling helmet design by innovating beyond foam. Woven aramid "cables" traverse the helmet and are anchored to carbon fiber side panels. Upon impact, the AirCage technology* works as a suspension bridge and is designed to distribute localized forces throughout the helmet. The Occipital Base Adjustment optimizes comfort by personalizing fit to individual head shape and helmet angle can be adjusted for compatibility with glasses. An adjustable Tri-Fix web system gives riders added comfort with updated, thinner 10mm webbing that minimizes strap noise. And the ANGi-ready, ultralight Mindset micro-dial fit system with height adjustability has been updated for improved grip and reaction for easy on-the-go fit. Our ultralight and supremely comfortable MIPS Node Air technology is integrated directly into the helmet padding, with a sleek low friction layer designed to dissipate rotational forces. With Specialized's proprietary development work, we added perforations to maximize breathability, performance, comfort, and weight savings. - AirCage innovation increases airflow. - Precision, full-wrap polycarbonate shell for increased durability and premium finish. - MIPS Air Node technology is MIPS' most ventilation-focused solution. - Adjustable Tri-Fix web splitter boosts comfort through personalized fit. - Occipital Base Adjustment optimizes comfort and compatibility with glasses. - ANGi-ready Mindset fit system for improved grip and reaction for easy on-the-go fit.

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon—power transfer, comfort, light weight, style—in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pavé-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you’re flying up a run-up on the ‘cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we’ve given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track and even more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

The Recon 3.0 is all about putting the legendary performance of our S-Works Recon - power transfer, comfort, light weight, style - in a package perfect for the XC and gravel rider. Starting with Body Geometry, Recon 3.0 delivers comfort and efficiency, with features that stand-out off the beaten path. Looking for in the saddle speed as well as off-bike performance? Recon 3.0 mates a carbon outsole with a Pave-inspired glass fiber forefoot to create Carbon STRIDE toe-flex, which lets your foot function naturally off the bike, yet still provides incredible power transfer with a stiffness index of 10.0. Whether you're flying up a run-up on the 'cross course or strolling into the brewhouse post ride, STRIDE toe-flex is a game changer. We know venturing off-road means venturing into the unknown, so we've given the Recon 3.0 XPEL Mesh to create a comfortable fit that sheds water, keeping the shoe light and making it dry as fast as it rides. Our SlipNot compound provides full rubber coverage of the outsole for off bike traction on any surface, with open treads to eject mud. Dual L6-Snap Boas and a Velcro forefoot closure ensure micro adjustable comfort with a secure fit designed for all day comfort and performance, whether your ride calls for open gravel, twisting single track, and more than your fair share of hike-a-bike. - Body Geometry sole and footbed are built with purpose and backed by science to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Carbon STRIDE toe-flex technology allows for natural toe movement off-bike but remains stiff for pedaling: Stiffness Index 10.0) - Fully-welded upper reduces seams for superior step-in comfort. - Independent BOA L6-Snap dials for on-the-fly micro-adjustment. - SlipNot rubber tread for confident traction on all terrain with removable toe studs. - Two-bolt cleat pattern fits all major MTB pedals. - Approximate weight: 355g (1/2 pair, Size 42)

The new S-Works Prevail II Vent is the next evolution in our Cooler Heads Prevail approach to helmet design. By taking our S-Works Prevail II and increasing the total vent surface area by 20%, we've developed a whole new category of ventilated helmets. This increase in vent surface area has allowed us to more than double the cooling capacity of the new Prevail II Vent compared to the original Prevail II. So, even on the hottest climbs in the most humid conditions, you can grind away, assured that the S-Works Prevail II Vent is keeping you cool and performing your best. - Our ANGi Crash Sensor gives you and your loved one' peace-of-mind like never before. When combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA to provide GPS-based activity tracking. Your new helmet even includes a lifetime subscription to the Specialized Ride app. - Our ultralight and supremely comfortable version of MIPS (MIPS SL) has only gotten better. We've added perforations, along with a ripstop mesh to maximize breathability and performance. With MIPS SL, we've essentially integrated MIPS technology within the helmet padding itself. MIPS SL's minimalist watchband attachment system provides 10 to 15 millimeters of rotation in every direction and offers the same brain protection benefits as other versions of MIPS, while also ushering in a new level of comfort and weight savings. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy. - The new 5th Dimension Cooling System, with its redesigned, patented, carbon fiber and aramid-reinforced skeleton, provides internal EPS support, allowing for large vents with deep internal channels and aligned exhaust ports, all adding up to double the cooling capacity and a 20% increase in total vent size. These same features that bring you unprecedented cooling also amount to six seconds saved over 40km in the Win Tunnel when compared to a standard road helmet. Additionally, the new updated, perforated MIPs SL pad kit keeps moisture moving and allows for even more breathability. - Thin, soft, and lightweight 4X DryLite webbing won't stretch out with sweat or water. - Tri-Fix web splitter improves comfort and ease of strap adjustments, while an in-strap webbing system delivers ultralight construction and security. - Ultralight Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit.

When time is of the essence, no other helmet will get you from start to finish faster than the S-Works TT. In order to create the fastest TT helmet out there, we turned to the design of the S-Works McLaren TT to make a helmet that truly differentiates itself from the 'competition.' The biggest innovation found on the S-Works TT is the patented Gill Vents that pull air into the helmet and allow it to freely flow out of the rear exhaust port. This makes for a time trial helmet that's not only fast (62 seconds over 40 kilometers compared to a standard road helmet to be exact), but will also keep you cool on the course. A fast helmet is useless if it doesn’t fit well, after all, so that’s why we spec'd the S-Works TT with our height-adjustable Mindset micro-dial fit system that makes for a tremendous fit and fast transitions. This, along with our lightweight 4X DryLite webbing that won’t stretch out with sweat or water and Instrap webbing system for ultra-light construction and security, make for a TT helmet that provides comfort over the long haul. Each S-Works TT helmet has been designed around a removable shield, which means that you get a TT helmet that's just as fast with a shield as it is with sunglasses—the first of its kind. Each helmet comes with two removable shields (Smoke and Clear) that allow for the ultimate in visibility when cranking out power while in the aerobars. With our most advanced Win-Tunnel-developed aerodynamics and ventilation, the S-Works TT helmet is your best option for pure speed. - Advanced wind tunnel developed aerodynamics and ventilation saves 62 seconds over 25 miles/40km (over a standard road helmet) - Innovative Gill Vent design improves airflow and reduces drag - Removable Shield has a robust snap fit and comes with both clear and smoke tints - Ultra-light, Mindset micro-dial fit system with height adjustability for a perfect fit - Tri-Fix strap splitter for improved comfort and ease of strap adjustments - Thin, soft and lightweight 4X DryLite padding won’t stretch out with sweat or water - Instrap webbing system for ultra-light construction and security - Complies with one or more of the following safety standards for bicycle helmets: CPSC, SNELL B90A, CE and AS/NZS

From the outset of the Torch 3.0 Road shoe design process, our goal was to create a performance offering as feature-packed as any top-end shoe. The challenge, however, was pulling this off at a palatable price. In order to achieve this, we utilized three strategically placed materials on the uppers that are welded together—TPU and mesh in the front and synthetic leather in the rear. This makes for a more comfortable and supportive front of the shoe. A stiff rear and heel cup, meanwhile, lock down your heel and keep all of your watts going into the pedals as efficiently as possible. This refined upper is combined with our legendary FACT carbon fiber sole to further ensure an efficient power transfer. Finally, we topped the Torch 3.0 off with two Boa S2-SV Snap dials for zonal closure, and a precise fit that leads to all-day comfort. - Body Geometry sole construction and footbeds are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce chance of injury by optimizing hip, knee, and foot alignment. - FACT carbon composite sole and torsion box construction is directionally rigid for outstanding power transfer: Stiffness Index 8.5. - Dual Boa S2-SV Snap dial closure for on-the-fly micro-adjustment, backed by the Boa Lifetime Guarantee. - Mesh, TPU, and synthetic layer upper are placed in specific zones for comfort and lock-down, and are thermobonded for a superior fit. - Standard Fit for support and all-day comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 248g (1/2 pair, Size 42)

What makes the perfect cycling shoe? Is it exceptional power transfer? Superior Comfort? Undeniable style? The simple answer is 'yes' to all of the above. With the S-Works 7, you get a shoe with no compromises. We took a no holds barred approach to transferring every bit of your power to the pedals. The lighter and stiffer Powerline carbon sole is new and brought to you by the same team that developed Rider-First Engineering. Why's this special? Because it led to their lightest and stiffest carbon outsole to date. A completely refined Padlock Heel, meanwhile, packs in more comfort with the same exceptional heel hold that you found in the previous iteration. And finally, the space-grade Dyneema material used in the upper doesn't stretch when pulled on, making sure that your foot stays where it's supposed to. With these all features combined, you can be sure that Specialized kept in line with the motto "every watt is sacred." In the comfort arena, Specialized kept all of the Body Geometry features you know and love, like the Longitudinal Arch, Varus Wedge, and Metatarsal Button. Each one of these features have been ergonomically designed and scientifically tested to not only boost power, but also to increase efficiency and reduce the risk of injury. They also took luxury into account by designing the S-Works 7 to have form that complements its function, so you'll find seams that are bonded together, rather than sewn, cleaning up the lines and contouring to your foot with slipper-like comfort. The custom CNC'd alloy BOA dials add some panache, but they also feature durable spring clutch internals and precise, one-millimeter micro-adjustments that let you perfectly dial in your fit. The S-Works 7 embodies everything Specialized knows about footwear, compacted into one shoe–no compromises, no shortcuts, just explosive speed and superior comfort. - Body Geometry sole and footbed are ergonomically designed and scientifically tested to boost power, increase efficiency, and reduce the chance of injury by optimizing hip, knee, and foot alignment. - Specialized's stiffest and lightest FACT Powerline carbon plate maximizes power transfer: Stiffness Index 15.0 - Dyneema Mesh is trapped between layers of four-way stretch mesh and TPU to create no-stretch zones for the ultimate connection and comfort. - Independent alloy BOA S3-Snap dials for on-the-fly micro-adjustment, backed by the BOA Lifetime Guarantee. - PadLock heel construction cradles the heel and is proven to improve acceleration - Titanium alloy cleat nuts can rotate to position pedal/cleats 5mm rearward. - Non-slip, replaceable heel tread with internally recessed screws for security. - Form Fit last with a roomy toe box for the ultimate in connectivity and comfort. - Three-bolt cleat pattern fits all major road pedals. - Approximate weight: 224g (1/2 pair, Size 42)

Whether you're waiting at the meetup spot or suiting up for the descent, our Men's Packable Down Jacket is built for the coldest parts of the ride. ALLIED Feather + Down Fill and PrimaLoft® Bio™ combine to create lightweight insulation that keeps you warm when you need it to but packs small when it's time to stow the cycling jacket in a jersey pocket. To help block the chill when temperatures drop, a roomy hood fits over your helmet to lock in the heat. The semi-form fit makes it easy to layer over your other cold weather gear. - ALLIED Feather + Down Fill is blended with PrimaLoft® Bio™ to create a sustainable synthetic insulation that's packable, lightweight, and warm. - An over-the-helmet hood keeps your head protected from the elements. - Fabric Content: SHELL A: 100% Nylon - FILL/INSULATION A: 90% Down, 10% White Goose Feather, 800 Fill Power - FILL/INSULATION B: 100% Polyester PCR with Bio Staple Cut Fibers, 100% Reycycled Content

Whether you're waiting at the meetup spot or suiting up for the descent, our Men's Packable Down Jacket is built for the coldest parts of the ride. ALLIED Feather + Down Fill and PrimaLoft Bio combine to create lightweight insulation that keeps you warm when you need it to but packs small when it's time to stow the cycling jacket in a jersey pocket. To help block the chill when temperatures drop, a roomy hood fits over your helmet to lock in the heat. The semi-form fit makes it easy to layer over your other cold weather gear. - ALLIED Feather + Down Fill is blended with PrimaLoft Bio to create a sustainable synthetic insulation that's packable, lightweight, and warm. - An over-the-helmet hood keeps your head protected from the elements. - Fabric Content: SHELL A: 100% Nylon - FILL/INSULATION A: 90% Down, 10% White Goose Feather, 800 Fill Power - FILL/INSULATION B: 100% Polyester PCR with Bio Staple Cut Fibers, 100% Reycycled Content

Whether you’re waiting at the meetup spot or suiting up for the descent, our Women’s Packable Down Jacket is built for the coldest parts of the ride. ALLIED Feather + Down Fill and PrimaLoft Bio combine to create lightweight insulation that keeps you warm when you need it to but packs small when it’s time to stow the cycling jacket in a jersey pocket. To help block the chill when temperatures drop, a roomy hood fits over your helmet to lock in the heat. The semi-form fit makes it easy to layer over your other cold weather gear. - ALLIED Feather + Down Fill is blended with PrimaLoft Bio to create a sustainable synthetic insulation that’s packable, lightweight, and warm. - An over-the-helmet hood keeps your head protected from the elements. - Fabric Content: SHELL A: 100% Nylon - FILL/INSULATION A: 90% Down, 10% White Goose Feather, 800 Fill Power - FILL/INSULATION B: 100% Polyester PCR with Bio Staple Cut Fibers, 100% Recycled Content

When we set out to improve the original S-Works Prevail, we knew that we had our work cut out for us. How could we improve on the industry benchmark for fit, ventilation, and comfort? By listening to our riders—that’s how. Through this, we realized that there were a few aspects of the original Prevail II that needed to be changed, with the biggest request being for a lower-sitting design. We thought to ourselves, "thinking big shouldn't result in bigger helmets," so with the Prevail, we set out to prove that big ideas can come in smaller packages. It all starts with our patented EPS construction that relies on multi-density foam that's paired with a robotically woven, Aramid-reinforced skeleton. This comes with a reduction in the overall size, creating a smaller profile that fits lower down on the head for a better fit and safety. It also has deep internal channels that are aligned from front-to-rear, so the air intake and exhaust are optimized for unparalleled cooling over the entire head. And in the Win Tunnel, we found these new designs amounted to six seconds saved over 40km when compared to a "standard" road helmet. Another standout feature of the S-Works Prevail II is the Gutter Action System that manages the flow of sweat, keeping it away from your eyes and dripping it off of the pads over your temple. Our new ANGi Crash Sensor gives you and your loved ones peace of mind like never before—when combined with our iOS or Android app, the sensor will detect a crash and send a text message to specified contacts in your phone. It also syncs with our app and STRAVA to provide GPS-based activity tracking. In the end, the S-Works Prevail II is the most complete lightweight race helmet we've ever made—perfect for hot, mountainous rides and flat, windy sections alike. - Patented Energy Optimized Multi-Density EPS construction helps to manage impact energy - The patented aramid-reinforced skeleton provides internal EPS support - Ultra-light Mindset HairPort II micro-dial fit system with height adjustability for the perfect fit - Mega Mouthport optimizes cooling and sweat evaporation - Aerodynamic design - 4th Dimension Cooling System with deep internal channels, large vents, and aligned exhaust ports - Thin, soft, and lightweight 4X DryLite webbing won't stretch out with sweat or water - Tri-Fix web splitter for improved comfort and ease of strap adjustments - Instrap webbing system for ultra-light construction and security - Gutter Action brow pad design for increased comfort and sweat management - Reflective decals for increased visibility to motorists in low-light conditions - Patented clip-on visor included - MIPS-equipped - Integrated ANGi crash sensor