Filter By:
Indoor Cycling

$57.99
Wahoo USB ANT+ dongle Kit connects KICKR, KICKR SNAP and other ANT+ enabled devices to a Mac or PC. The 3-foot extension cord extends the USB ANT+ transmitter away from the computer and towards the connected device to avoid signal interference.

$110.00
The Wahoo BlueSC speed and cadence sensor transforms your phone into a powerful cycling computer. Using Bluetooth Smart and ANT+ technology, it tracks cycling speed, cadence, and distance which can be paired with your favorite cycling app including Strava and Zwift, or paired to your bike computer. It's weatherproof, small with a low drag profile, and comes with a rubber band and zip tie mounts.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and GPS devices.
- No tangled wires on your bike to connect the sensor to your device.
- Provides accurate speed data during your ride
- Provides accurate cadence data during your ride
- BlueSC comes with a rubber band mount and zip tie mount.
- The Blue SC sensor will fit with most bikes and frame sizes

$124.99
The Wahoo KICKR Floormat is the perfect partner for your KICKR. It's water resistant and anti-slip to keep the trainer in place no matter how much you sweat! The thickness and material make it noise insulating, so your family will thank you during those early morning rides.
- Impervious to sweat and spilled water bottles.
- Gripping texture keeps the KICKR in place, so you can focus on your ride.
- Material helps to reduce noise and make the KICKR even quieter.
- Beveled edge keeps the mat in line with the floor.

$59.99
The Wahoo RPM speed sensor is the sleek, magnet-less solution for capturing cycling speed data. It easily mounts to your bike's front wheel hub, and the Bluetooth Smart and ANT+ dual band technology allow you to connect to and display data on both smartphones and bike computers. Tracking speed data has never been this easy.
- Both ANT+ and Bluetooth Smart capabilities allow for a wireless connection to both smartphones and bike computers.
- No tangled wires on your bike to connect the sensor to your device.
- The RPM speed installs easily with no magnets required
- It only weighs 16.5 grams with the mount included
- Provides accurate speed data during your ride
- Mounts on most front wheel hub with a secure silicone casing
- Two LED lights show the sensor's device connection (blue) and speed detection (red)
- No charging required! Operates on a coin cell battery for up to 1 years.
- RPM Speed will fit with most bikes and frame sizes

$114.99
All you need for cycling data, all together at once! The Wahoo RPM Speed and Cadence sensors are both a sleek, wireless, and magnet-less solution. Each mounts easily to your bike and the Bluetooth Smart and ANT+ duel band technology allows you to connect and display data on both smartphone and bike computers.
- Dimensions (LxWxH): 1.25" x.75" x 1"
- Weight: 7 grams (without mount)
- Battery: CR2032
- Battery Life: Up to 12 months
- Water Rating: IPX7 (waterproof up to 5 ft)
- Wireless Signal Strength: Up to 10 feet
- Note: Speed Sensor is NOT compatible with spin bikes

$84.99 - $94.99
Use these quick releases to put a racing bike with disc brakes or a mountain bike with a quick-release skewer in a Tacx direct drive trainer. Both axles are supplied with an adapter set so you can select the right combination for your bike. These axles are only suitable for the Tacx direct drives.

$49.99 - $64.99
The E-Thru Trainer Axle allows the use of a mountain bike in a Tacx trainer. These axles are only suitable for Tacx classic trainers.

$1,299.99
Bigger and Stronger for a Better Ride
Featuring an improved ride feel and more accurate power measurements, this smart bike trainer has everything you need for an enjoyable and efficient indoor training session.
- Ride hard. This trainer can handle sprints up to 2,000 watts.
- Work up a sweat with inclines up to 16% that hold up to your most serious sprints.
- Accuracy matters. Measure your power to within 2.5%.
- Keep crushing it with your favorite apps, including Zwift and Tacx.
- Finally, a trainer that won’t wake the whole house when you ride hard.
ACCURATE AND RELIABLE
This trainer is redesigned to let you track your performance and progress with reliable, consistent measurements. That includes power, speed and cadence, measured accurately within 2.5%.
READY TO SPRINT
The well-balanced design and large footprint of the FLUX 2 Smart trainer ensures maximum stability, even during the most explosive sprints, up to 2,000 watts.
CLIMB HIGHER
Get the most out of your intense workouts by training on realistically simulated inclines up to a 16% gradient.
A MORE REALISTIC RIDE
At 16.8 lbs (7.6 kg), a heavy flywheel ensures a realistic ride feel and good responsiveness.
SMOOTH AND SILENT
This direct-drive trainer is designed to bring vibration and noise levels to the absolute minimum, resulting in one of the most silent flywheel-equipped bike trainers available.
IMPROVED COMPATIBILITY
The trainer comes with additional axle adapters to significantly improve the axle compatibility. It is compatible with 142x12 mm and 148x12 mm axles — right out of the box.
HIGHLY COMPATIBLE
The FLUX 2 Smart trainer communicates via BLUETOOTH Smart technology and ANT+ FE-C protocol, so it works with a number of popular training apps such as TrainerRoad and Zwift.
ABLE TO STAND ALONE
You can opt to use the trainer in stand-alone mode. When not connected, it will simulate a flat road; the faster you ride, the higher the resistance.
DEVICE COMPATIBILITY
Connect FLUX 2 Smart to multiple devices simultaneously, so you can enjoy Tacx software and track your performance on your Garmin bike computer at the same time.
TACX TRAINING SOFTWARE
Enjoy a library filled with more than 100 high-quality, real-life videos that let you experience the rush of riding the steep hills of the Alps or the cobblestone roads of Milan.
TACX TRAINING PLANS
Take advantage of structured training plans, designed for your fitness level to help you meet your goals. Race live opponents, upload GPS data, ride with 3-D maps and more.

$649.99
For year-round training and a fully interactive indoor cycling experience, the Flow Smart trainer offers everything you need. Its wheel-on design allows for easy setup and storage. It even connects to your favorite apps, such as Zwift, Tacx, and TrainerRoad.
- Wheel-on design sets up with two easy clicks and securely locks in place
- Measures speed, power, and cadence
- Virtually silent flywheel lets you ride without disturbing others
- Works with popular third-party training apps such as Zwift and Tacx
- Train with realistically simulated inclines up to a 7% gradient
FEATURES
Type of trainer: Interactive Smart trainer with electric brake
Magnets: 6 Magnets
Transmission: Roller, 30mm
Electrical requirements: 110-240 Volt
Power indicator: None
Connection indicator (ANT/BT): None
Firmware upgradable: Yes
Suitable bikes: Race, Tri, & MTB; if necessary with axle skewer; 29" wheel with Tacx trainer tire
Suitable axles: Width of rear fork: Race 130mm, MTB 135mm. Adapters for other widths also available
Supplied with: Front wheel support, Quick release for road bikes and mountain bikes (5mm)
SPECIFICATIONS
Max. power (40 km/h): 800 Watt
Max. incline: 6%
Simulation of descent: No
Max. torque: 15.3 Nm
Max. brake force: 45 N
Flywheel: 1.6 kg
Mass inertia: 11.8kg (26.0 lbs)
Calibration: Spin down
Footprint (lxw): 675 × 650 mm (26.6 × 25.6 in)
Height: 410 mm (16.1 in)
Dimensions when folded: 565 × 410 × 245 mm (22.2 × 16.1 × 9.65 in)
Weight: 9.41 kg (20.7 lbs)
Article number: T2240
DATA OUTPUT AND CONTROL
Wireless communication: ANT+ FE-C, Bluetooth Smart open
Control by: ANT+FE-C bike computers, Connect to computer via ANT+antenna, Smartphone, Tablet, Stand alone
Output: Cadence , Power , Speed
Read out on: Bike computer, Computer with ANT+ antenna, Smartphone, Sports watch, Tablet
Error Tolerance: <5%

$15.99
Universal quick release skewer for placing your bike in the trainer or direct drive. This axle replaces the standard quick release, allowing racing bikes and mountain bikes to be used with Tacx trainers.

$39.99
The Skyliner is a front wheel support for use with Tacx classic trainers. It raises and supports the front wheel for a natural cycling position and increased stability. It also serves as a handle to carry the trainer.

$49.99
A sweat cover with a pocket for your smartphone. The sweat cover protects your bike against perspiration and enables the use of a phone while training. The Tacx sweat cover is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting. Suitable for a variety of phone sizes - max. length 138mm, max. width 68mm.

$62.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

$62.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

$62.99
The Tacx trainer tires have been developed specifically for riding indoors on bike trainers. The special rubber minimizes the risk of overheating, slipping, and wear and tear. They are also quieter than regular rear tires on both road and mountain bikes. Tacx trainer tires are not suitable for outside riding.

$99.99
Use this ANT+ antenna to connect an ANT+ trainer to your computer. That enables you to use computer software during your training sessions, such as the Tacx Trainer software, Zwift, and TrainerRoad. These programs read the training data transmitted by an ANT+ trainer and can control the trainer.
It features a long cable so the receiver can be placed close to the trainer for an optimal reception without loss. The antenna is compatible with all trainers that communicate wirelessly via ANT+.

$69.99 - $79.99
Kurt Kinetic's 12mm Traxle Through-Axle lets you attach your mountain bike to a Kinetic trainer without changing the original skewer.
The Kinetic Traxle comes in 3 thread pitches:
- T-2101 Coarse: M12 x 1.75mm
- T-2102 Medium: M12 x 1.5
- T-2100 Fine: M12 x 1.00mm (Fine XL has the same thread pitch and is a longer version of the fine Traxle)

$49.99
Kinetic's Riser Ring lets you level your bike when you're riding on your trainer. Plus, there are 3 other steps that let you simulate climbing by elevating the front wheel. The Riser Ring is simple to use and stable for excellent support.
- Designed for the following Kinetic trainers: the Road Machine, Magnetic, and Cyclone

$114.99
This freehub body enables you to fit a Campagnolo cassette on the NEO Smart and the FLUX Smart. Suitable for 9 through 11 speed Campagnolo cassettes.
How to place the Campagnolo Body:
1. Remove the cap with a 5-millimeter Allen key.
2. Replace the Shimano/SRAM body with the Campagnolo body.
3. Place the cap on the Campagnolo body and tighten with a 5-millimeter Allen key.

$39.99
The Tacx Sweat Cover protects your bike from corrosion caused by perspiration. It is made from absorbent textile to catch and retain perspiration. Its clever design fits all bikes and enables easy mounting.

$29.99
This narrow towel was developed specifically for indoor bike training sessions and is used by many professional riders during their warm-up or indoor training sessions.
- Highly absorbent
- Measures 30cm x 115cm

$139.99
Give your Tacx trainer the best possible protection for storage and transport with this sturdy trainer bag. It's designed specifically for Tacx trainers and has a separate compartment on the inside for accessories. The double inner layer with foam lining provides optimum protection, minimizing the risk of damage.

$99.99
Minoura Training Accessories like the ANT+ Minoura Heart Rate monitor with belt is a fantastic complement to your favorite trainer or roller.
- Pickup and transmit your heart rate data with a comfortable fit
- Low energy ANT + (2.4GHz) wireless protocol
- Minoura is an official ANT + Alliance member
- Universal on every ANT + device
- Net Weight: 67 grams (including battery)
- Battery: 1 x CR2032

$104.99
Minoura Training Accessories like the ANT+ Minoura Speed/Cadence sensor (SPD/CD Separate type) are a fantastic complement to your favorite trainer or roller.
- Pickup and transmit the speed and cadence data
- Separate type
- Low energy ANT+ wireless protocol
- Minoura is an official ANT+ Alliance Member
- Universal on every ANT+ device

$26.99
The Internal Chain Actuated Cone Cup is designed to work with chain actuated internal rear hubs, including Sturmey Archer. It also works perfectly with pre-2018 Brompton folding bicycles.

$139.99
If you're really serious about your trainer sessions, check out Kurt Kinetic's Pro Flywheel. It attaches quickly and easily to your Road Machine or Rock and Roll flywheel (sold separately) for a total of 18 pounds. It takes your Kurt Kinetic trainer's already stellar real-road feel and ups the realism, which is a must for hard-core endurance workouts, like tempo and long distance rides. You'll also experience longer wind-ups when doing sprint intervals and a longer coast-downs.

$14.99
This cone cup is designed to work best when used with the Kinetic Skewer included in the box with every trainer.
- Each new trainer ships with one of the Slotted Cone Cups installed on the non-drive side of the trainer
- When installing, be sure to place the cam-end of the skewer in the slotted cone cup

$24.99
This cone cup replaces the threaded cone cup on pre-2013 Rock and Roll trainers and is the mounting solution for carbon Trek Speed Concept frames that require a smaller cone cup on the drive side of the trainer than the pre-installed version.
- Only compatible with the Rock and Roll trainer
- This cone cup's smaller outside diameter fits makes it compatible with carbon Trek Speed Concept bikes (aluminum Speed Concept bikes are compatible with the Standard Cone Cup)
- Use this cone cup on the drive-side of the Rock And Roll trainer (it is not necessary to replace both cone cups)
Page 1 of 1